Module uartdr

Data Register, UARTDR

Structs

• UARTDR_SPEC
  Data Register, UARTDR

Type Aliases

• BE_R
  Field BE reader - Break error. This bit is set to 1 if a break condition was detected, indicating that the received data input was held LOW for longer than a full-word transmission time (defined as start, data, parity and stop bits). In FIFO mode, this error is associated with the character at the top of the FIFO. When a break occurs, only one 0 character is loaded into the FIFO. The next character is only enabled after the receive data input goes to a 1 (marking state), and the next valid start bit is received.
• DATA_R
  Field DATA reader - Receive (read) data character. Transmit (write) data character.
• DATA_W
  Field DATA writer - Receive (read) data character. Transmit (write) data character.
• FE_R
  Field FE reader - Framing error. When set to 1, it indicates that the received character did not have a valid stop bit (a valid stop bit is 1). In FIFO mode, this error is associated with the character at the top of the FIFO.
• OE_R
  Field OE reader - Overrun error. This bit is set to 1 if data is received and the receive FIFO is already full. This is cleared to 0 once there is an empty space in the FIFO and a new character can be written to it.
• PE_R
  Field PE reader - Parity error. When set to 1, it indicates that the parity of the received data character does not match the parity that the EPS and SPS bits in the Line Control Register, UARTLCR_H. In FIFO mode, this error is associated with the character at the top of the FIFO.
• R
  Register UARTDR reader
• W
  Register UARTDR writer