book polish

book/en/src/by-example/app_idle.md

@@ -17,6 +17,9 @@ The example below shows that `idle` runs after `init`.
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example idle
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/idle.run}}
 ```
 
@@ -41,6 +44,9 @@ The following example shows how to enable sleep by setting the
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example idle-wfi
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/idle-wfi.run}}
 ```
 

book/en/src/by-example/app_init.md

@@ -24,5 +24,8 @@ Running the example will print `init` to the console and then exit the QEMU proc
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example init
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/init.run}}
 ```

book/en/src/by-example/app_minimal.md

@@ -11,6 +11,9 @@ RTIC is designed with resource efficiency in mind. RTIC itself does not rely on
 For a minimal example you can expect something like:
 ``` console
 $ cargo size --example smallest --target thumbv7m-none-eabi --release
+```
+
+``` console
 Finished release [optimized] target(s) in 0.07s
    text    data     bss     dec     hex filename
     924       0       0     924     39c smallest

book/en/src/by-example/channel.md

@@ -42,6 +42,8 @@ async fn receiver(_c: receiver::Context, mut receiver: Receiver<'static, u32, CA
 }
 ```
 
+Channels are implemented using a small (global) *Critical Section* (CS) for protection against race-conditions. The user must provide an CS implementation. Compiling the examples given the `--features test-critical-section` gives one possible implementation. 
+
 For a complete example:
 
 ``` rust
@@ -50,6 +52,9 @@ For a complete example:
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-channel --features test-critical-section 
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/async-channel.run}}
 ```
 
@@ -80,6 +85,9 @@ In case all senders have been dropped `await` on an empty receiver channel resul
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-channel-no-sender --features test-critical-section 
+```
+
+``` console 
 {{#include ../../../../rtic/ci/expected/async-channel-no-sender.run}}
 ```
 
@@ -93,6 +101,9 @@ The resulting error returns the data back to the sender, allowing the sender to
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-channel-no-receiver --features test-critical-section 
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/async-channel-no-receiver.run}}
 ```
 
@@ -108,5 +119,8 @@ In cases you wish the sender to proceed even in case the channel is full. To tha
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-channel-try --features test-critical-section
+```
+
+``` console 
 {{#include ../../../../rtic/ci/expected/async-channel-try.run}}
 ```

book/en/src/by-example/delay.md

@@ -27,6 +27,8 @@ async fn foo(_cx: foo::Context) {
 
 Technically, the timer queue is implemented as a list based priority queue, where list-nodes are statically allocated as part of the underlying task `Future`. Thus, the timer queue is infallible at run-time (its size and allocation is determined at compile time).
 
+Similarly the channels implementation, the timer-queue implementation relies on a global *Critical Section* (CS) for race protection. For the examples a CS implementation is provided by adding `--features test-critical-section` to the build options.
+
 For a complete example:
 
 ``` rust
@@ -35,6 +37,9 @@ For a complete example:
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-delay --features test-critical-section 
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/async-delay.run}}
 ```
 
@@ -112,5 +117,8 @@ The complete example:
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example async-timeout --features test-critical-section 
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/async-timeout.run}}
 ```

book/en/src/by-example/hardware_tasks.md

@@ -25,5 +25,8 @@ The example below demonstrates the use of the `#[task(binds = InterruptName)]` a
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example hardware
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/hardware.run}}
 ```

book/en/src/by-example/resources.md

@@ -33,6 +33,9 @@ Running the example:
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example locals
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/locals.run}}
 ```
 
@@ -79,6 +82,9 @@ In the example below we have three interrupt handlers with priorities ranging fr
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example lock
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/lock.run}}
 ```
 
@@ -94,6 +100,9 @@ As an extension to `lock`, and to reduce rightward drift, locks can be taken as
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example multilock
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/multilock.run}}
 ```
 
@@ -113,6 +122,9 @@ In the example below a key (e.g. a cryptographic key) is loaded (or created) at
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example only-shared-access
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/only-shared-access.run}}
 ```
 
@@ -136,5 +148,8 @@ Using `#[lock_free]` on resources shared by tasks running at different prioritie
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example lock-free
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/lock-free.run}}
 ```

book/en/src/by-example/software_tasks.md

@@ -29,6 +29,9 @@ See the following example:
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example spawn
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/spawn.run}}
 ```
 You may `spawn` a *software* task again, given that it has run-to-completion (returned). 
@@ -43,6 +46,9 @@ Technically the async executor will `poll` the `foo` *future* which in this case
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example spawn_loop
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/spawn_loop.run}}
 ```
 
@@ -56,6 +62,9 @@ Technically, a `spawn` to a *future* that is not in *completed* state is conside
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example spawn_err
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/spawn_err.run}}
 ```
 
@@ -68,6 +77,9 @@ You can also pass arguments at spawn as follows.
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example spawn_arguments
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/spawn_arguments.run}}
 ```
 
@@ -86,6 +98,9 @@ Conceptually, one can see such tasks as running in the `main` thread of the appl
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example zero-prio-task
+```
+
+``` console
 {{#include ../../../../rtic/ci/expected/zero-prio-task.run}}
 ```
 

book/en/src/by-example/tips_destructureing.md

@@ -1,14 +1,15 @@
 # Resource de-structure-ing
 
 Destructuring task resources might help readability if a task takes multiple
-resources.
-Here are two examples on how to split up the resource struct:
+resources. Here are two examples on how to split up the resource struct:
 
 ``` rust
-{{#include ../../../../examples/destructure.rs}}
+{{#include ../../../../rtic/examples/destructure.rs}}
 ```
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example destructure
-{{#include ../../../../ci/expected/destructure.run}}
+```
+``` console
+{{#include ../../../../rtic/ci/expected/destructure.run}}
 ```

book/en/src/by-example/tips_indirection.md

@@ -1,31 +1,26 @@
 # Using indirection for faster message passing
 
-Message passing always involves copying the payload from the sender into a
-static variable and then from the static variable into the receiver. Thus
-sending a large buffer, like a `[u8; 128]`, as a message involves two expensive
+Message passing always involves copying the payload from the sender into a static variable and then from the static variable into the receiver. Thus sending a large buffer, like a `[u8; 128]`, as a message involves two expensive
 `memcpy`s.
 
-Indirection can minimize message passing overhead:
-instead of sending the buffer by value, one can send an owning pointer into the
-buffer.
+Indirection can minimize message passing overhead: instead of sending the buffer by value, one can send an owning pointer into the buffer.
 
-One can use a global memory allocator to achieve indirection (`alloc::Box`,
-`alloc::Rc`, etc.), which requires using the nightly channel as of Rust v1.37.0,
-or one can use a statically allocated memory pool like [`heapless::Pool`].
+One can use a global memory allocator to achieve indirection (`alloc::Box`, `alloc::Rc`, etc.), which requires using the nightly channel as of Rust v1.37.0, or one can use a statically allocated memory pool like [`heapless::Pool`].
 
 [`heapless::Pool`]: https://docs.rs/heapless/0.5.0/heapless/pool/index.html
 
-As this example of approach goes completely outside of RTIC resource
-model with shared and local the program would rely on the correctness
-of the memory allocator, in this case `heapless::pool`.
+As this example of approach goes completely outside of RTIC resource model with shared and local the program would rely on the correctness of the memory allocator, in this case `heapless::pool`.
 
 Here's an example where `heapless::Pool` is used to "box" buffers of 128 bytes.
 
 ``` rust
-{{#include ../../../../examples/pool.rs}}
+{{#include ../../../../rtic/examples/pool.rs}}
 ```
 
 ``` console
 $ cargo run --target thumbv7m-none-eabi --example pool
-{{#include ../../../../ci/expected/pool.run}}
+```
+
+``` console
+{{#include ../../../../rtic/ci/expected/pool.run}}
 ```

rtic/examples/pool.rs

@@ -4,6 +4,7 @@
 #![deny(warnings)]
 #![no_main]
 #![no_std]
+#![feature(type_alias_impl_trait)]
 
 use heapless::{
     pool,
@@ -41,7 +42,7 @@ mod app {
     }
 
     #[task(binds = I2C0, priority = 2)]
-    async fn i2c0(_: i2c0::Context) {
+    fn i2c0(_: i2c0::Context) {
         // claim a memory block, initialize it and ..
         let x = P::alloc().unwrap().init([0u8; 128]);